Water floating polyurethane sponge (yellow) and water sinkable AQUAPOROUSGEL “CC-10B” (white)
water absorption of AQUAPOROUSGEL
| maximum holding water |
water absorbing rate |
structure | attached SS [g/carrier-L] |
|
|---|---|---|---|---|
| AQUAPOROUSGEL | 1.9 | 0.62 | wall-structure | 10∼12 |
| polyurethane sponge | 0.86 | 0.12 | rib-structure | 8∼10 |
The advantage of AQUAPOROUSGEL's high hydrophilicity can be obtained at installation.
AQUAPOROUSGEL swells and sinks in water rapidly, allowing immediate flow after installation.



High wearability
accerated abrasion test

Long time achieved by high wearability
Flow diagram example; BOD reduction

application examples
| wastewater | influent [m3/day] |
tank volume [m3] |
amount of carrier loaded (filling ratio) |
HRT [h] |
before | after | ||
|---|---|---|---|---|---|---|---|---|
| BOD [mg/L] |
COD [mg/L] |
BOD [mg/L] |
COD [mg/L] |
|||||
| Dyeing Plant | 4000 | 550 | 165m3 (30%) |
3.3 | 100 | 90 | 15 | 50 |
| Food Plant A | 450 | 300 | 60m3 (20%) |
16 | 1000 | 1000 | 30 | 100 |
| Food Plant B | 2400 | 550 | 122m3 (22%) |
5.5 | 1350 | 300 | 200 | 250 |
examples (bench plant)
| wastewater | influent [m3/day] |
amount of carrier loaded (filling ratio)[%] |
HRT [h] |
before | after |
|---|---|---|---|---|---|
| BOD [mg/L] |
BOD [mg/L] |
||||
| Beverage botoling plant | 12.48 | 25 | 1.92 | 200 | 50 |
| Milk botolong plant | 1.73 | 30 | 13.9 | 1000 | 40 |
| Fisheries plant | 2.13 | 20 | 11.3 | 800 | 50 |
| Paper plant | 1.0 | 30 | 24 | 2000 | 200 |
| item | CC-10B | CE-10 |
|---|---|---|
| material | polyurethane (multi-porous gel) |
polyolefin |
| appearance | cube | cube |
| size | 10mm (swelled) |
10mm |
| density | 30dry-kg/wet-m3 | 50kg/m3 |
Please contact us for specification adjustments.
Information and data presented here are based in carefully conducted laboratory tests and are believed to be accurate. However, results cannot be guaranteed and it is suggested that customers confirm results in their own laboratory.